Knowledge Base Article 7CTE461564 
Dealer Access

Issue
• CS-F3160/F5060 Cloning Software 
• CS-F5060 Cloning Software 
F3161/F4161 
F5061/F6061 


Resolution
CS-F3160/F5060 version 2.2 or greater is for all F3161 series radios and the current F5061 radios. Both these radios use the UT-126 option board for the digital features. 

IMPORTANT: To use CS-F3160/F5060 software, the radio must have version 2.2 (or greater) firmware installed. To use the digital features, the radio must have the UT-119/UT-126 Digital Option Board installed (firmware version 2.1, or greater). Version 2.4 adds 6.25kHz Trunking to the software (must have version 2.4 or greater firmware in the radio and Option Board). 

Use with CS-F3160/F5060 adjust software. 


CS-F5060 version 1.1 or less is for older F5061 series radios without the enhanced digital features. It uses the UT-119 digital board. Use with CS-F5060 adjust software. 

IMPORTANT: CS-F5060 software and the F5061 radio firmware and UT-119/UT-126 firmware will not function on the older F3061/F4061 series radios. 


The current versions are: 
• CS-F3160/F5060 Clone Software 2.8 
• CS-F3160/F5060 Adjust Software 2.0 

• CS-F5060 Clone Software 1.1 
• CS-F5060 Adjust Software 1.0 

Product IDs 
• CS-F3160/F5060 Product ID: 298402-123456 
• CS-F5060 Product ID: 298401-123456 

Cloning Cable: OPC-966/UC 

Category
Land Mobile : Conventional : F3161 / F4161